Rainbow flat cable

11 28 2022

Rainbow flat cable have higher assembly reliability and quality. The cabling reduces the hardware required for internal connection, such as solder joints, trunk wires, baseplate wire, and cables commonly used in traditional electronic packaging, so that the cabling can provide higher assembly reliability and quality. Because the traditional internal hardware composed of complex multiple systems is prone to high component misalignment rate during assembly. The cable can be moved, bent, and twisted without damaging the wire, and can comply with different shapes and special package sizes. Its only limitation is the volume space problem. Because it can withstand millions of dynamic bends, the cable can be well suited for continuous or periodic motion in the connected system, becoming part of the final product function. Solder joints on rigid PCBS are subjected to thermal mechanical stress and fail after hundreds of cycles.
The model classification of rainbow flat cable and rainbow wire! The model of rainbow flat cable is divided into: glue rainbow flat cable and a molding rainbow flat cable, first of all, we explain UL1007 rainbow flat cable, UL1061 rainbow flat cable, UL1571 rainbow flat cable, UL1015 rainbow flat cable, these four rainbow flat cable for the glue wire, what is the glue wire, The glue cable is the UL1007 electronic wire, UL1061 electronic wire, UL1571 electronic wire, UL1015 electronic wire single electronic wire parallel side by side with the glue, a rainbow flat cable is divided into, UL2651 rainbow flat cable this is called spacing rainbow wire, also known as UL2651 rainbow row wire, the spacing was divided into 1.27mm,2.0mm,2.54 mm, and 3.0mm spacing rainbow flat cable.
Features of the rainbow flat cable:
1. The small cable is very thin, even not much bigger than the tip of a needle, so it should be operated under a magnifying glass. Self-made magnifying glass table.
2. Fix the cable with tape paper.
3. Press the cable with the groove blade, fix the blade with tape paper, press on both sides, and the middle is the cable to be welded.

4, The blade can be grinded with a hand saw blade, you can also use a scraping blade. Next is welding, with a flat edge electric soldering iron, grinding the mouth into a knife edge. Less tin during welding, welding speed should be fast.